How to Make a Cut-Away Stitched Grid

While vacuuming yesterday I had a brain fluff so I dropped what I was doing (so much for cleaning house) and picked up a fabric remnant.  I cut a circle out of the fabric, backed it with water soluble stabilizer, put it in a machine embroidery hoop, and set about stitching a grid.  When the circle was filled in with intersecting stitching lines, I satin stitched around the edge of the circle to assure that all the grid lines were secure.  Finally, I soaked it in warm water to remove the stabilizer and waalaa, my brain fluff worked. 

What am I going to do with it?  I don't have the foggiest idea.  It will probably sit for a long time as another "what if" thing.  I've learned so much from others who have been generous enough to share their methods and processes on-line that this is my small way of giving back.  Who knows when someone might see a "how to" that would work for something they are thinking about creating.

Alphabet Play

While spending a bit of time out of town recently I found myself needing to pass some downtime hours.  To keep my hands busy I started fiddling around with creating an alphabet to call my own.  So far I've only made capital letters from A to L, but, if you stay tuned, I'm sure there will be more to come.

"Hearts All A Glow" - The making of an art quilt

I belong to a creative art quilt exchange group, Serendipity Art Quilts, whose April challenge was to create a 12" x 12" quilted work based on the theme "Hearts All A Glow".  What follows is a description of how I executed this challenge.

The Final Quilt

The Final Quilt with the Heart Opened

These are the steps involved in executing my idea of a heart opening to shine love.

Patterns

Two heart patterns were cut out of card stock.  The smaller one was used for the embossed aluminum element.  The larger one was used for the quilted heart halves that open to reveal the metallic heart.

Embossed Metallic Heart

The metallic heart was cut from the bottom of a disposable, aluminum baking pan.  The heart was then place on a mouse pad and embossed by drawing on it with a ball point pen that had no ink left in it.

Alcohol Ink Applied to Metallic Heart

The metallic heart was then "painted" with alcohol inks.

Hand Dyed Fabric

A 12 1/2" x 12 1/2" square was cut from hand dyed fabric.  This became the front background fabric upon which the heart would be placed.

Hand Dyed Fabric for Heart

More hand dyed fabrics were auditioned for use as the halves of the heart that would open.

Tracing the Pattern onto Fabric

The pattern was then outlined with chalk onto the fabric.

Batting Cut to Size

The pattern, without the tabs, was traced onto batting and cut to match the fabric heart elements.

Unfortunately, I did not take pictures of the stitching process for the heart halves, but it progressed, as follows:  The fabric and batting "sandwich" was stitched around the edge from the start of the tabs to the end of the tabs, leaving the tabs unstitched so that the sandwich could be turned right side out.  Once it was turned right side out, the heart halves were free motion quilted.

                                     

                                      Overall Background Quilting

I drew letters on card stock and cut them out as patterns for the words.  I then applied fusible webbing to the back of hand dyed fabric, used the letter patterns to cut the fabric, fused the words to the quilt sandwich and finally top stitched the words to the background.

The field upon which the heart would be placed consisted of a backing, batting and front fabric.  The batting was laid atop both the front and back fabrics and stitched with a 1/4" foot.  1/3 of the bottom was left open for turning and after being turned right side out, the bottom was closed by hand stitching.

The larger heart pattern was then traced with chalk onto the background and quilted.   After quilting the heart shape the entire background was quilted with an all over, modified feather design.  This quilting needed to be done before the heart halves were added so that there would not be a risk of bending the metallic heart.

The heart halves were then placed in an open position upon background with the tabs facing into the quilted heart shape on the background.  

Placement of Elements

Then the metallic heart was placed on top of the quilted heart shape to cover the tabs.  I used two very small pieces of double stick tape to hold the metallic heart in place so that it would not shift when I top stitched it to the background.  Once the metallic heart had been stitched down, the entire heart element was complete.

Frog Closures

Try as I might, I could not successfully execute knotting "frog" closures, so a quick visit to the fabric store solved that problem.  Once the frogs were stitched down, the front of the quilt was completed.

Process Recap

The final step involved sewing a hanging sleeve to the back and making a label.

When I emboss metal again, I will try to remember to take pictures of the process and post them.  Metal is fun to work with and can add a lot of "pop" to a piece.

Create Surface Design with White Flour Paste

Last week Jane LaFazio posted a mini tutorial on making a resist with white flour on her blog, JaneVille,  Even though I was getting ready to hit the road for points north when I read the post, the method seemed so simple that I had to try it before I jumped into the car.

Here are the steps I took and will definitely take again...

Step #1:  Lay out a plastic bag on the work surface.  This is to protect your table or work counter.  Then place fabric on the plastic bag.  Do not wet the fabric.

Step #2:  Mix 1 cup water with 1 cup white flour.  Stir well to make a fairly lump free mixture.  Use only COLD water.  To make a larger batch of resist, just keep the ratio 1:1 flour and water.

Step #3:  Apply the flour and water resist mixture to the fabric.

Step #4:  Spread the flour and water resist mixture evenly over the fabric with almost anything with a straight edge.

 Step #5:  Inscribe a design into the flour and water resist.  

At first the design didn't hold, but after letting it set up for just a few minutes, the design seemed to remain clear.

Closeup

Step #6:  Now, this is the difficult part.  LEAVE THIS ALONE AND LET IT COMPLETELY DRY.

Since I was out of town for 5 days, this first attempt had become bone dry.  It was so dry that it buckled, but that was more than okay.  

Dried and buckled fabric with flour and water resist.

Step #7:  Push down on the buckled areas.  The resist with crack and that is what it is supposed to do.  Next, gently rumple the entire piece to produce overall cracking in the resist.

Step #8:  Apply thinned fabric paint over the entire piece.  

I didn't thin down the paints enough for them to penetrate well, so I sprayed the entire piece with plain water.

 

Step #9:  Here is another difficult part.  LET THE FABRIC PAINT COMPLETELY DRY.

Step #10:  After the paint is COMPLETELY DRY the piece may be soaked in water to release the flour and water resist or....

I did a preliminary scraping with a spatula to remove the majority of the resist before soaking the piece in water.  I'm on a septic tank sewer system and I didn't want to risk clogging the drains with the dissolved flour that might act like a sticky paste and possibly clog the system.

Step #11:  Soak the entire piece is warm water to remove residual flour and water resist.  The piece may now be washed in the washing machine and heat set in the dryer.  Or if all of the resist is removed by soaking, let the piece dry completely and then heat set with an iron.

The initial inscribed handwriting and leaf forms were not completely clear and that may have been because I put the resist on too thickly.  However, I really like the way it turned out.

Some closeup views 

AND ALL OF THIS IS WITH A GREAT BIG THANK YOU TO JANE LAFAZIO FOR POSTING HER TUTORIAL ON HOW TO MAKE THE WHITE FLOUR AND WATER RESIST.

Fiber Art Exhibition at Santa Monica Art Studios Hangar Gallery

It was thrilling to receive the announcement that my work, "Escape and Return" had been juried into a month long exhibition at the Santa Monica Art Studios Hangar Gallery.  The flyer I received only lists the artists and their works who were chosen from Quilts on the Wall submissions.  The gallery is huge and will also have a plethora of fiber art submitted by other outstanding artists.

Santa Monica Art Studios Hangar
Gallery Flyer
Opening Reception  Saturday, May 19, 2012 from 6-9 p.m.
3026 Airport Avenue, Santa Monica, CA  90405
Exhibits runs from May 19 - June 16, 2012
Regular Gallery Hours:  Wednesdays-Saturdays Noon - 6 pm

"Escape and Return"
Come one!  Come all!  It promises to be a great exhibit.
Hope to see you there.